10 Liter Swing Handle Jerry Can - DG
The ESP 10 Litre Swing Handle Can in DG Approved Format and is ideally suited for products that are rated hazardous chemicals in Packaging Groups II & III. These are also approved by CAA for airfreight.
These are equipped with an injection moulded “loop” style handle that is secured to the Jerry Can by way of a pivot pin which allow the handle to move backwards and forwards to give the user greater control over the rate of pour as well as better access to hard to reach places over the more common “in-line” handles which are fixed. The actual Swing Handle can be moulded with an optional rubberised grip that makes carrying, and pouring this Jerry Can the most ergonomical available.
At the front of the Jerry Cans is a 70mm Tamper Evident Cap, which is the widest diameter permissible under Dangerous Goods testing rules. This wide diameter enables liquid contents of various viscosities to be emptied quickly, which is very handy if pouring above shoulder height! this cap can also be vented to stop the Jerry Cans from expanding when used with industrial products that give off vapour, i.e. chlorine based chemicals.
At the rear is a 38mm Tamper Evident Cap that acts as a breather cap to provide a smoother pour if needed. This cap is fitted with an o'ring and is tightened at the factory to the required torque setting. Under this cap is an internal 3/4' BSP thread to enable the use of taps to permit easy decanting in small volumes.
In between the 38mm cap and the base of the container runs a Visi-Strip of Natural material allowing the user to see at a glance the balance of contents of the Jerry Can without needing to open the caps and peer inside and guess.
All in all, the new Swing Handle range of Jerry Cans is the new generation of containers for all markets where you want to be offering your customers the best package!
MINIMUM ORDER / PALLET QUANTITY | 140 |
FDA APPROVED / FOOD GRADE | YES |
DANGEROUS GOODS (DG) APPROVED | 3H1/Y1.6/100 |
MATERIAL OF MANUFACTURE | High Density Polyethylene (HDPE) |
WEIGHT | 750 Grams |
NECK THREADS | 70mm Buttress & 38mm Breather Cap at rear |
LID INCLUDED IN UNIT PRICING | YES - Black, Blue, Green, Red, and White options |
LENGTH (External) | 287mm |
WIDTH (External) | 227mm |
HEIGHT (External) | 275/255mm |
EX ESP STOCK COLOUR(S) | Ex Stock in White with Black 38mm Caps fitted |
MOQ FOR OTHER COLOUR | 980 units |
SHJC10DG
Swing Handled Jerry Cans